Air Compressor Technical Center
In-depth knowledge base: maintenance manuals, diagnostic troubleshooting, and factory energy efficiency solutions.
Need technical support?
Our engineers are always ready.
Causes and solutions to problems with Atlas Copco GA37, GA45, GA 55, GA 75 air compressors
The BOGE brand has been around since 1907 in Germany. BOGE is the number 1 air compressor brand in Germany and holds a high market share in the world. In Vietnam, the BOGE brand has been around since 1995 and is increasingly strengthening its position in a number of important industries.
Instructions for checking and replacing air compressor minimum pressure valve
Air compressor bearing errors are one of the errors that are easy to detect, because when this error occurs, the machine will operate abnormally and make strange sounds.
Applications in Fusheng compressors
According to the allowable operating range of Fusheng air compressors, the operating conditions in air-cooled or heat pump applications are more critical than air-cooled: the load of the former is about 15-30% higher than the latter causing high discharge temperature, coil temperature and oil temperature. For the compressor to run normally, it is necessary to install a liquid injection system or an oil cooler to cool the compressor.
Troubleshooting and periodic maintenance of screw air compressors
In order for machines to operate efficiently and for a long time, each business, factory, or factory needs to have a plan for a regular maintenance schedule for its equipment and assets.
Maintain compressed air systems
During Y-Δ transfer, the solenoid transfer time should be set to 40 ms. The possibility of arc rejection should be considered when setting transfer times. After completing the entire start-up procedure, note the coolant temperature.
Check the compressor before starting
Before operating the air compressor, technicians need to ensure technical safety principles and requirements before operating, such as: checking the power source, checking the installation position, pressure and condition of the machine.
Technical specifications of Fusheng SR series compressor
Before installing the attachment, use the adapter at the suction inlet to release Nitrogen The charged Nitrogen inside the compressor (0.5 bar). New compressors are filled with lubricants in the factory before delivery.
4 steps to control the capacity of Fusheng series SR compressor
One of the most commonly used devices in manufacturing businesses, factories, and industrial zones is various air compressor systems. Therefore, to achieve high work efficiency as well as good productivity, every business needs to set up and manage a Fusheng air compressor capacity control system.
Structure of Fusheng SR series screw air compressor
Structure of Fusheng SR series screw air compressor