Technical Center

Operating status and control mode of Kaeser air compressor

Operating Status There are 4 operating statuses. LOAD: Inlet valve is open. The compressor supplies compressed air to the entire system. Drive motor runs under full load.IDLING:Inlet valve closed. The minimum pressure/check valve separates the oil from the air system.

Ingersoll Rand air compressor spare parts

During operation and operation of Kaeser air compressors, it can cause injuries, fires and explosions to humans. Therefore, it is necessary to pay close attention to safety issues when using Kaeser air compressors.

Kobelco air compressor maintenance mode

When servicing is complete the remaining time period must be reset to the default service time.

Notification and warning of 9 Kaeser Control Sigma machine errors

Check the interface link/connection between the two control screens, check the maximum length of the cable and the screen, check that all interface parameters are working properly.

Error messages and warnings 8 sewing Keaser Sigmal control

Check the interface link/connection between the 2 control screens, check the maximum length of the cable and the screen, check all interface parameters are fully active, 1 main frame and 1 sub frame, sub configuration, configuration and character (format) for both are identical

Kaeser Sigma control error messages and warnings part 6

How to distinguish real 'genuine' bearings and forged bearings

KyungWon air compressor is one of the important equipment in industries, helping to provide stable compressed air for many applications. However, during use, technical problems cannot be avoided, and one of the common problems is that the air compressor does not produce air. So what is the cause and how to fix it? Join Minh Phu to find out details in the article below.

Kaeser Sigma Control 2 air compressor warning message

Minh Phu guides customers to read the warning notice on Kaeser Sigma Control air compressor part 2

Kaeser Sigma control machine warning message 1

Check condensate drainage (clean and repair). Check the expansion valve, there is no input water pressure, the shut-off valve does not work.

How to distinguish between real Sakura filters and fake Sakura filters

Counterfeit goods are often very sophisticatedly designed, but in many other cases, counterfeit products have signs to identify. SAKURA is  trademarked by the representative of PT Selamat Sempurna Tbk, it is a division of ADR-a group of companies and has registered a global trademark and the products have been exported to more than 100 countries worldwide.

Repair and maintenance of Boge air compressors - Germany

The BOGE brand has been around since 1907 in Germany. BOGE is the number 1 air compressor brand in Germany and holds a high market share in the world. In Vietnam, the BOGE brand has been around since 1995 and is increasingly strengthening its position in a number of important industries: Mechanical, Marine, Oil and Gas, Chemicals, Pharmaceuticals, Food... For the machine to operate durably, periodic maintenance is required. The routine maintenance schedule is virtually the same for all BOGE oil-filled screw compressors (including the CL, C and S series). The only difference is between the maintenance requirements for V-belt-driven compressors and direct-drive (coupling) machines, which require periodic belt replacement. The table below shows the periodic maintenance activities and parts replacement requirements according to Boge standards

Spare part code equivalent to Compair air compressor

We all want to operate a compressed air system that is reliable, efficient and trouble-free.  One way you can achieve this is by following the equipment manufacturer's daily and weekly maintenance checks.  After all prevention is better than cure!   For many companies, compressed air is considered very important for factory operations. An air compressor is a high-value machine if it is not well maintained, leading to  high energy costs, the machine can experience unexpected problems that affect production schedules and even damage the product. However, there are a number of ways you can ensure that your compressed air system operates reliably, efficiently and optimally.  This includes following the manufacturer's recommended maintenance schedule, using only high quality parts, and selecting only reputable, experienced, and specialized air compressor technicians and service providers to perform maintenance work.  In addition, performing daily and weekly maintenance checks as recommended by the manufacturer is a very simple task, which on the other hand helps you operate your compressed air system at peak efficiency.